SOLVENT CLEANING PRODUCTS
Specialist precision cleaning solvent
Clarea®HC96 is a high flash point solvent designed for immersion and manual cleaning applications.
Clarea®HC96 should be selected when a non-hazardous cleaner with powerful solvency, a high flash point, very low odour and low non-volatile residue (NVR) is required. Suitable for use at high temperatures in a variety of commercially available immersion cleaning equipment.
Clarea®HC96 is formulated to effectively remove a wide range of soils such as heavy greases, mineral oils, coolants, lubricants, synthetics, waxes and particulate matter.
Safe for use with ferrous and non-ferrous alloys such as aluminium, copper and copper alloys, nickel magnesium, steel, stainless steel, titanium and zinc. It is also compatible with many polymeric substrates and elastomers.
A suitable replacement for acetone, isopropyl alcohol (IPA), methyl ethyl ketone (MEK), toluene and other low-flash point, flammable materials. It is also an effective alternative to caustic cleaners.
Process:
- Manual Cleaning: Apply Clarea®HC96 at full concentration to the desired substrate by brush, pad or cloth.
- Immersion Cleaning: Add Clarea®HC96 undiluted to the wash tank reservoir at temperatures between ambient and 82°C.
- Co-Solvent Vapour Degreasing: Add a ratio of Clarea®HC96 and rinsing agent according to the specific application.
The solvent of choice for for immersion and manual cleaning
Clarea®HC96 has a unique range of characteristics which make it the cleaning solvent of choice for critical cleaning applications in the following industries:
- Avionics and Aerospace
- Electronics and Electrical
- Environmental
- General Cleaning
- Industrial and Manufacturing
- Marine and Maritime
- Mechanical Engineering
- Medical Device Manufacturing
- Military
- Motorsport
- Oxygen Cleaning
- Precision Optics
- Power Generation
- Railways and Automotive
PRODUCT OVERVIEW
- Very high Flash Point (96°C).
- Very Low Odour.
- Low Toxicity.
- Good Solvency.
- Non-Corrosive.
- Non-Flammable.
- Non-Combustible.
- Low Surface Residue/NVR.
- Zero Ozone Depletion Potential (ODP).
- Low Global Warming Potential (GWP).
- Low Toxicity.
- Non-Flammable.
- Non-Combustible.
For the removal of:
- Mineral Oils.
- Synthetic Oils.
- Rust Inhibitors.
- Lubricating Oils.
- Particulate Matter.
- Water-Soluble Oils.
- Coolants.
- Greases.
- Fingerprint Oils.
- Waxes.
- Please consult product Safety Data Sheet for further information.
Available in the following container sizes:
- 15kg cans.
- 165kg drums
The shelf life for this product is 36 months when it is stored in its original, sealed container at room temperature. However, the product should be inspected after 36 months from the date of manufacture prior to customer use.
TYPICAL PHYSICAL PROPERTIES
| Appearance | Clear Liquid |
| Odour | Odourless |
| Flash Point | 96°C |
| Specific Gravity @20°C | 0.83 |
| Ozone Depletion Potential (ODP) | Zero |
| Global Warming Potential (GWP) | Low |
| Volatile Organic Compound (VOC) | 830 g/l |
The above represents typical properties of Clarea® HC96 precision cleaning solvent, but do not represent any other product specification. Other Clarea® products have similar characteristics, but are not necessarily identical to the properties listed above. For specific values and specifications, consult the product’s Certificate of Analysis.
Customer service and technical support provided from qualified distributors worldwide. We can supply Safety Data Sheets, independent laboratory reports, product samples and further assistance. For more information or advice please contact us by telephone on +44 (0) 20 8281 6370 or use our contact form.
All solvent cleaning products are supplied and supported by EnviroTech Europe Ltd. Manufactured in the United Kingdom and available on short delivery times through our dedicated team of distributors worldwide.
Share this page: