Specialist precision cleaning solvent with a Flash Point over 96°C
Non-chlorinated industrial cleaning solvents with a Flash Point of 62°C
Non-chlorinated industrial cleaning solvents
with a Flash Point of 40°C
SOLVENT CLEANING PRODUCTS
Solvent Cleaning Products
industrial cleaning solvents for the safe removal of dirt, oil, grease and other contaminants
Solvent cleaners are used in many industries to remove dirt, oil, grease, or other contaminants from machined and fabricated metal, plastic and composite surfaces.
Clarea® non-chlorinated solvent cleaners are compatible with all metals, composites and most plastics used to remove dirt, oil, grease, or other contaminants from surfaces without causing harm or leaving residue. They are used as immersion cleaners for component cleaning in manufacturing and engineering industries and as wipe cleaners for large surface areas prior to painting or powder coating.
The environmental concerns and health hazards of the chlorinated solvents used as industrial degreasing agents has led to the formulation of this EnviroTech range of safer cleaning solvents.
What to consider when choosing suitable solvent cleaning products
Solvents used for cleaning must be highly refined and leave no residues on drying. They need to be highly effective removing oils and soils without causing damage or corrosion of the parts or components being processed and leave minimal residues.
Cleaning specifications vary widely from very demanding automotive and aerospace applications to less demanding applications where critical cleaning is not needed such as pre-used parts or assemblies from the transportation, aerospace, or manufacturing equipment sectors. Heavily contaminated when removed from service these must be free of oils, soils, grease and dirt before disassembly prior to refurbishing and rebuilding. Much of this work will be manual and the considerations for the safety of operators, hand wiping or brush cleaning is paramount.
Clarea® solvent cleaners are aliphatic hydrocarbon based low odour degreasing solvents with specified flash points. They will remove oils, greases, hydraulic fluids cutting fluids and a wide variety of hydrocarbon based protective coatings. Can be safely used with all metals and composites and most plastic and paint finishes.
Industrial Degreasing Solvents – Safe For The Environment
Eco Friendly Industrial Degreasing Solvents, Safe For Users And The Environment. Cleaning agents are used in many industries to remove dirt, oil, grease, or...
FEATURED PRODUCT
Specialist Precision Cleaning Solvent
High flash point solvent designed for immersion and manual cleaning applications
Clarea HC96 is a non-hazardous solvent cleaner with a very low odour and low non-volatile residue (NVR). Suitable for use at high temperatures in a variety of commercially available immersion cleaning equipment. A suitable replacement for acetone, isopropyl alcohol (IPA), methyl ethyl ketone (MEK), toluene and other low-flash point, flammable materials. It is also an effective alternative to caustic cleaners. Read more…
Customer service and technical support provided from qualified distributors worldwide. We can supply Safety Data Sheets, independent laboratory reports, product samples and further assistance. For more information or advice please contact us by telephone on +44 (0) 20 8281 6370 or use our contact form.
All solvent cleaning products are supplied and supported by EnviroTech Europe Ltd. Manufactured in the United Kingdom and available on short delivery times through our dedicated team of distributors worldwide.
Share this page: